# Auto-trade with FXCM-UK

**URL:** <https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932>\
**Category:** C2\
**Created:** [June 3, 2010, 10:35pm UTC](https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932 "2010-06-03T22:35:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MandelMus](https://yyz2.discourse-cdn.com/flex028/user_avatar/forums.collective2.com/mandelmus/32/115_2.png) [@MandelMus](https://forums.collective2.com/u/MandelMus)\
**Post date:** [June 3, 2010, 10:35pm UTC](https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932/1 "2010-06-03T22:35:31Z")

</div>

I noticed that Gen3 works with FXCM-UK accounts. However, when going through the prompts during "setup", I noticed that there is no direct link with FXCM. Instead, we have to sign up with BulldogFX (who uses FXCM-UK). What do you suggest we do if we already have an account with FXCM-UK?

---

<div class="post-metadata">

**Author:** ![MatthewKlein](https://yyz2.discourse-cdn.com/flex028/user_avatar/forums.collective2.com/matthewklein/32/21382_2.png) [@MatthewKlein](https://forums.collective2.com/u/MatthewKlein)\
**Post date:** [June 3, 2010, 11:24pm UTC](https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932/2 "2010-06-03T23:24:29Z")

</div>

I will get in touch with you via email. - MK

---

<div class="post-metadata">

**Author:** ![MikeWaugh2](https://yyz2.discourse-cdn.com/flex028/user_avatar/forums.collective2.com/mikewaugh2/32/12306_2.png) [@MikeWaugh2](https://forums.collective2.com/u/MikeWaugh2)\
**Post date:** [September 10, 2018, 3:01pm UTC](https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932/3 "2018-09-10T15:01:23Z")

</div>

Hi Matthew - same issue here, can you advise? thanks

---

<div class="post-metadata">

**Author:** ![GuillaumeLaHaye](https://yyz2.discourse-cdn.com/flex028/user_avatar/forums.collective2.com/guillaumelahaye/32/238_2.png) [@GuillaumeLaHaye](https://forums.collective2.com/u/GuillaumeLaHaye)\
**Post date:** [June 20, 2022, 10:59pm UTC](https://forums.collective2.com/t/auto-trade-with-fxcm-uk/2932/4 "2022-06-20T22:59:23Z")

</div>

A few years later… I tried to setup FXCM as a broker but there was no way to enter any brokerage account info or to link my account in C2.

How is FXCM supported?